Table of Contents
Advertisement
5
Select the mailbox type
using the
or
and press the [ENTER] but-
ton.
[1. CONFIDENTIAL]:
Allows a one time document
retrieval from the mailbox.
[2. BULLETIN BOARD]:
Allows multiple document retrievals
from the mailbox.
[3. RELAY]:
Not used in this operation. (
"Setting up relay mailbox")
6
Enter a mailbox number (up
to 20 digits) with the digital
keys and press the
[ENTER] button.
If you make a mistake, press one of the following keys to correct the mistake. For
key locations of [BACKSPACE], [DELETE] and [INSERT], see the following page.
P.29 "Keyboard"
[CLEAR/STOP] key:
Pressing this key clears all of the values that you entered.
[BACKSPACE] key:
Each press of this key deletes the values that you are entering one by one.
[DELETE] key:
Pressing this key after highlighting the value with the key deletes the value.
[INSERT] key:
Pressing this key permits the insertion of a desired character before (in front of)
an existing character highlighted by the cursor. Press this key again to exit the
Insert mode.
When 100 mailboxes have been
already registered, the screen on
the right appears for about 2
seconds and returns to the basic
screen.
When the same mailbox num-
ber has been already regis-
tered, the screen on the right
appears for about 2 seconds and
returns to the screen to enter a
mailbox number.
7
To set a password, select
"1. YES" using the
button and press the
[ENTER] button.
When a password is not
required, select "2. NO".
→ go to step 9.
MAILBOX TYPE
button
1.CONFIDENTIAL
2.BULLETIN BOARD
3.RELAY
P.114
MAILBOX SETUP(CONFIDENTIAL)
NEW MAILBOX NUMBER(MAX20):
500
MAILBOX SETUP(CONFIDENTIAL)
No more MAILBOX
MAILBOX SETUP(CONFIDENTIAL)
Already assigned
MAILBOX SETUP(CONFIDENTIAL)
or
PROGRAM PASSWORD?
1.YES
2.NO
Mailbox Communication
113
Advertisement
Table of Contents
