Table of Contents
Advertisement
5 ENTERING & SETTING ITEMS
To set the default setting for relay originator report
When this equipment is setup as a relay originator, the report of the transmission to the
relay stations is output.
1.
Select "05. RELAY ORIGINATOR
REPORT" using the
ton and press the [ENTER] button.
2.
Select the output setting using the
or
[ENTER] button.
[1.ALWAYS]:
To always print a report whenever a
document is transmitted.
[2.ON ERROR]:
To only print a report when an error
has occurred.
[3.OFF]:
To not print a report automatically.
*
Default for North America: [2.ON
ERROR]
Default for Europe: [1.ALWAYS]
3.
To print the first page image of the Fax
document on report, select "2. ON"
and press the [ENTER] button.
Select "1. OFF" if this option is not
required.
*
Default: [2.ON]
To set the default setting for relay station TX report
When this equipment is setup as a relay station, the report of the transmission to the relay
destinations is output.
1.
Select "06. RELAY STATION
REPORT" using the
ton and press the [ENTER] button.
2.
Select the output setting using the
or
[ENTER] button.
[1.ALWAYS]:
To always print a report.
[2.ON ERROR]:
To only print a report when an error
has occurred.
[3.OFF]:
To not print a report automatically.
*
Default for North America: [2.ON
ERROR]
Default for Europe: [1.ALWAYS]
210
Default Settings for List & Report Output
or
but-
button and press the
or
but-
button and press the
COMMUNICATION REPORT
03.MULTI-ADD REPORT
04.MULTIPOLL REPORT
05.RELAY ORIGINATOR REPORT
RELAY ORIGINATOR REPORT
1.ALWAYS
2.ON ERROR
3.OFF
PRINT 1st PG IMAGE?
1.OFF
2.ON
COMMUNICATION REPORT
04.MULTIPOLL REPORT
05.RELAY ORIGINATOR REPORT
06.RELAY STATION REPORT
RELAY STATION REPORT
1.ALWAYS
2.ON ERROR
3.OFF
Advertisement
Table of Contents
