Table of Contents
Advertisement
3.
To print the first page image of the Fax
document on report, select "2. ON"
and press the [ENTER] button.
Select "1. OFF" if this option is not
required.
*
Default: [2.ON]
To set the default setting for relay TX end terminal report
When this equipment is setup as a relay station, the report of the transmission to the relay
destinations is transferred to the destination registered.
1.
Select "07. RELAY END REPORT"
using the
or
press the [ENTER] button.
2.
Select the output setting using the
or
button and press the
[ENTER] button.
[1.ALWAYS]:
To always send a report to the origina-
tor.
[2.ON ERROR]:
To send a report when an error has
occurred.
[3.OFF]:
To not send a report automatically.
*
Default for North America: [2.ON
ERROR]
Default for Europe: [1.ALWAYS]
3.
To print the first page image of the Fax
document on report, select "2. ON"
and press the [ENTER] button.
Select "1. OFF" if this option is not
required.
*
Default: [2.ON]
4
Press the [FAX] button to return to the Fax basic screen.
You can press the [USER FUNCTIONS] button instead of the [FAX] button to exit the
user function mode. The screen returns to the basic screen of the mode selected
immediately before step 1.
P.30 "Message LCD Screen"
PRINT 1st PG IMAGE?
1.OFF
2.ON
COMMUNICATION REPORT
button and
05.RELAY ORIGINATOR REPORT
06.RELAY STATION REPORT
07.RELAY END REPORT
RELAY END REPORT
1.ALWAYS
2.ON ERROR
3.OFF
PRINT 1st PG IMAGE?
1.OFF
2.ON
Default Settings for List & Report Output
211
Advertisement
Table of Contents
