Table of Contents
Advertisement
1 BEFORE USING FAX
Function keys
1. CHAIN DIAL COMM (
Used to dial a remote party using Chain Dialing.
2. CHARGE CODE (
Allows entry of a charge code at the time of dialing or during Abbreviated Dial and One
Touch Dial programming.
3. DELAYED COMM (
Schedules a delayed communication job to be performed at a designated date and time.
4. DIRECT TX (
Allows transmission direct from the document glass or the document feeder without the use
of memory.
5. LOW SPEED TX (
Used to select a lower transmission speed to transmit a document when poor line conditions
are expected, such as when transmitting to an overseas location that can only accept low
speed data.
6. ITU MAILBOX (
Used for Mailbox Communications or Relay, Transmission with remote Faxes that support
the ITU-T functions.
7. COVER SHEET (
Used to attach a cover sheet to a document to be transmitted.
8. PRIORITY TX (
Sends pages set on the document glass or in the document feeder ahead of all previously
scheduled transmissions.
9. MULTI (
Used to create a manual grouping for multi-address transmission.
10. RECOVERY TX (
Recovers from memory and sends incomplete transmissions.
11. SEND AFTER SCAN (
Used to select whether the dialing starts while the equipment is scanning the documents or
after the equipment has scanned all documents to memory.
28
Description of Each Component
P.86 "Chain Dial Communication")
P.103 "PIN mask")
P.87 "Delayed transmission (Time designation)")
P.89 "Direct transmission")
P.90 "Low speed transmission")
P.112 "Mailbox communication condition")
P.91 "Cover sheet registration")
P.94 "Priority transmission")
P.106 "Multi-address Transmission (Broadcasting)")
P.95 "Recovery transmission")
P.102 "Send after scan")
Advertisement
Table of Contents
