Table of Contents
Advertisement
6
When you register all the
locations, select "COM-
PLETE" using the
button and press the
[ENTER] button.
You can use the [START] button
instead of ENTER.
7
Transmission starts.
To cancel the reserved transmission (
missions")
To confirm the result of transmission, print out the transmission journal (
"Transmission/Reception journal") or multi-address transmission report (
"Multi-address transmission report").
Group Broadcast transmission
This is a method of pre-entering remote FAXes that you often send the same original to as a
group, and specifying this group when you want to send an original.
To create Group Numbers, see the following page.
P.166 "Entering group dialing numbers"
Print out the Group Number List and confirm that the remote Fax locations which you want to
specify have been already registered. (
1
Press the [FAX] button on
the control panel.
2
Place the original(s) and
set the transmission condi-
tions.
P.38 "When setting originals
on the glass"
P.41 "When using the Auto-
matic Document Feeder
(optional) or Reversing Auto-
matic Document Feeder
(optional)"
P.42 "Setting the Transmis-
sion Conditions"
3
Press the [SPEED DIAL]
key.
"TELEPHONE NUMBER LIST"
screen appears.
MULTI GROUP
NEXT DESTINATION
or
REVIEW LIST
COMPLETE
SCANNING TO MEMORY
JOB NUMBER
SCANNING PAGE
RESIDUAL MEMORY
P.76 "Canceling Reserved Memory Trans-
P.238 "Group number list")
TELEPHONE NUMBER LIST
1.ABB. NUMBER
2.SEARCH NAME
3.GROUP NUMBER
Multi-address Transmission (Broadcasting)
003
:046
:001
:099%
P.214
P.225
109
Advertisement
Table of Contents
