Table of Contents
Advertisement
4 SYSTEM FUNCTIONS
3
Select the desired mailbox
type using the
button and press the
[ENTER] button.
[1. CONFIDENTIAL]:
If a data is retrieved from this box,
the data will be cleared.
[2. BULLETIN BOARD]:
Even if a data is retrieved from this
box, the data remains in the box.
[3. RELAY]/[4. MAILBOX SETUP]:
Not used in this operation.
4
Select "1. PRINT MAILBOX"
using the
and press the [ENTER] but-
ton.
5
Enter the desired mailbox
number (up to 20 digits)
with the digital keys and
press the [ENTER] button.
If you make a mistake, press one of the following keys to correct the mistake. For
key locations of [BACKSPACE], [DELETE] and [INSERT], see the following page.
[CLEAR/STOP] key:
Pressing this key clears all of the values that you entered.
[BACKSPACE] key:
Each press of this key deletes the values that you are entering one by one.
[DELETE] key:
Pressing this key after highlighting the value with the key deletes the value.
[INSERT] key:
Pressing this key permits the insertion of a desired character before (in front of) an
existing character highlighted by the cursor. Press this key again to exit the Insert
mode.
If the selected mailbox has not
been set, the screen on the right
appears for about 2 seconds and
returns to the screen to enter a
mailbox number.
128
Mailbox Communication
or
or
button
P.29 "Keyboard"
MAILBOX
1.CONFIDENTIAL
2.BULLETIN BOARD
3.RELAY
CONFIDENTIAL
1.PRINT MAILBOX
2.TX TO MAILBOX
3.POLL FROM MAILBOX
CONFIDENTIAL
1.PRINT MAILBOX
2.TX TO MAILBOX
3.POLL FROM MAILBOX
PRINT(CONFIDENTIAL)
MAILBOX NUMBER(MAX20):
PRINT (CONFIDENTIAL)
No entry
Advertisement
Table of Contents
