Table of Contents
Advertisement
2 BASIC FUNCTIONS
1
Press the [FAX] button on
the control panel.
2
Place the original(s) and
set the transmission condi-
tions.
on the glass"
matic Document Feeder
(optional) or Reversing Auto-
matic Document Feeder
(optional)"
sion Conditions"
3
Press the [SPEED DIAL]
button.
4
Select "3. GROUP NUM-
BER" using the
button and press the
[ENTER] button.
5
Enter the Group Dialing
number (1 to 1999)
assigned to the desired
remote party and press the
[ENTER] or [START] button.
When setting originals on the glass
The Group Dialing number and the name of the remote party appear on the LCD
display for about 2 seconds, and "BUILD FAX JOB" screen appears.
When you want to send multi-page originals with the current scanning condi-
tions unchanged, place the next original on the glass, and select "1. SCAN
NEXT ORIGINAL" on "BUILD FAX JOB" screen, then press the [ENTER] but-
ton. After finished scanning of the last page, select "3. COMPLETE" on
"BUILD FAX JOB" screen and press the [ENTER] button to send the originals.
When you want to change the scanning conditions for each page, select "2.
CHANGE CURRENT SETTINGS" on "BUILD FAX JOB" screen and press the
[ENTER] button.
For details of this operation, see the following page.
When you want to send single-page original, select "3. COMPLETE" on
"BUILD FAX JOB" screen and press the [ENTER] button to send the original.
54
Specifying the Remote Fax
P.38 "When setting originals
P.41 "When using the Auto-
P.42 "Setting the Transmis-
or
P.45 "Setting the Scanning Conditions for Each Page"
TELEPHONE NUMBERS LIST
1.ABB. NUMBER
2.SEARCH NAME
3.GROUP NUMBER
TELEPHONE NUMBERS LIST
GROUP NUMBER (1-1999):
TELEPHONE NUMBERS LIST
GROUP NUMBER:
U.S. Division
1
0001
Advertisement
Table of Contents
