Table of Contents
Advertisement
5 ENTERING & SETTING ITEMS
If the One Touch key has been
already assigned,
1. Alarm buzzer sounds and the
screen on the right appears.
2. Select the desired item using
the
press the [ENTER] button.
[1.DELETE]:
To delete the One Touch key
dialer registered. → go to step 10.
[2.RETAIN]:
To retain the One Touch key dialer
registered. → go to step 10.
11
Returns to the screen to
enter an abbreviated num-
ber.
Repeat steps 4 to 10 when you
register multiple abbreviated dial
numbers.
12
Press the [FUNCTION CLEAR] button to return to the basic screen.
One Touch Key Dial Numbers
Up to 75 One Touch key dial numbers can be registered. Registering 2nd TEL number allows
you to automatically transfer a Fax to the number when 1st TEL number resulted in redialing-
over.
Confirm the registered contents on the One Touch Number List. (
ber list")
2nd TEL number is not available for relay TX, polling RX and mailbox communication.
You can also register One Touch Key Dial Numbers by using the Web-based utility TopAc-
ces. For details, see the Setup Guide for Printing Functions.
When the Scanner Upgrade Kit (optional) is installed, an Email address can be registered to
the One Touch Key Dial Number. For details, see the Scanning Guide.
160
Entering the Remote Fax Number
or
button and
ABB. NUMBER
ONE TOUCH:
NEW York Office
Already assigned
ONE TOUCH KEY
1.DELETE
2.RETAIN
ABB. NUMBER
Operation completed
ABB. NUMBER
ENTER ABB. NUMBER (1-999):
001
02
001
001
P.239 "One touch num-
Advertisement
Table of Contents
