Appendix - E Connecting To A Lorex Dvr For Normal Recording - Lorex L14S244C Instruction Manual

APPENDIX - E
CONNECTING TO A
DVR – Back Panel
NOTE
:
When recording to a Digital Video Recorder, the DVR may indicate a Video Loss as the monitor
sequences between channels. This Video Loss occurs because the monitor's switching function is
analogue, whereas the DVR is a digital product. Therefore a synchronization problem will result.
The Solution to this problem is to adjust the Video Loss alarm sensitivity setting to 3 frames on your DVR
unit, or simply disable the video loss function on your DVR. Please contact the manufacturer of your DVR
if you require further assistance.
LOREX DVR
FOR NORMAL RECORDING
-19-