Format Memory; Scheduled Recording; Creating A Recording Schedule - Lorex LW1741 User Manual

10 Recording

10.1 Format Memory

It is highly recommended to format the microSD card prior to initial recording.
To format the microSD card:
CAUTION
Formatting erases all data on the microSD card. This step cannot be undone.
1. Insert the microSD card into the card slot on the receiver until you hear a "click."
Please insert the card according to the diagram on the side panel of the receiver.
2. Press , then select the Record Setting icon. Press
3. Select Format card and press
4. Select Confirm and press
Note
Please allow a few moments for formatting to finish. Formatting time will vary depending on the size
of the card.
5. A message appears to confirm formatting. Press
closed.

10.2 Scheduled Recording

Use scheduled recording to have the system automatically record continuously or just mo-
tion-events during a set period of time. The system records all 4 channels in Quad mode.
Note
Auto Sequence Viewing mode and Quad mode are available during schedule recording without affecting
the recording files.
Prerequisite:
Please ensure you have set the proper date and time on the receiver prior to setting a re-
cording schedule. See 9 Setting the Time, page 20.
When should I use schedule recording?
• Use scheduled continuous recording if the camera is pointed at an area with high traffic,
such as an entrance way or a road.
• Use scheduled motion recording if the camera is pointed at an area with low traffic,
such as a back door or a storage room.
CAUTION
Do not remove the microSD card while the system is recording. Disable all recording on the system be-
fore ejecting the microSD card.

10.2.1 Creating a Recording Schedule

CAUTION
Scheduled recording overrides manual recording.
#LX400030; r.16602/16610; en-US
to confirm.
to confirm.
repeatedly until all menus are
to confirm.
22