Table of Contents
Advertisement
4.7
Boot Options
This option allows you to specify your preferred setting for boot-up.
The following screen appears if you select Boot Options from the Basic
Configuration menu:
Boot Sequence
st
1
[Floppy Disk]
nd
2
[IDE CD-ROM ]
rd
3
[Hard Disk
th
4
[LANDesk® Service Agent]
First Hard Disk Drive .................[ SCSI]
Fast Boot .............................[Auto]
Silent Boot ...........................[Disabled]
Num Lock After Boot ...................[Enabled]
Memory Test ...........................[Disabled]
Release All Blocked Memory ............[Disabled]
*Configuration Table ...................[Enabled]
Boot from LanDesk Service Agent .......[Disabled]
The above parameter marked with '*' will only
appear if you access the Advanced Options level
in the Main Menu. Please refer to section 2.1 for
more information.
4.7.1
Boot Sequence
This parameter allows you to specify the boot search sequence during POST.
•
The system checks this drive first.
st
1
.
•
The system then checks this drive if it can not boot from the
nd
2
.
specified drive.
st
1
•
If the
rd
st
3
.
1
•
If the
th
st
4
.
1
BIOS will display an error message if the drive(s) specified is not bootable.
Boot Options
]
and
searches fail then it boots from this drive.
nd
2
searches fail then it boots from this drive.
nd
rd
, 2
, and 3
Index
cxiii
Advertisement
Table of Contents
