4.2.10 Ide Secondary Channel Slave; 4.2.11 Total Memory; Serial Port 1; Serial Port 2 - Acer Altos 12000 Series User Manual

4.2.10 IDE Secondary Channel Slave

This parameter specifies the current configuration of the IDE device connected to
the slave port of the secondary IDE channel. The default setting is None.

4.2.11 Total Memory

This parameter specifies the total amount of onboard memory. The memory size
is automatically detected by BIOS during the POST. If you install additional
memory, the system automatically adjusts this parameter to display the new
memory size.
1st Bank/2nd Bank/3rd Bank/4th Bank
The 1st Bank, 2nd Bank, 3rd Bank, and 4th Bank parameters indicate the type and
size of DRAM installed in DIMM sockets 1, 2, 3, and 4 respectively. The None
setting indicates that there is no DRAM installed.

4.2.12 Serial Port 1

This parameter shows the serial port 1 address and IRQ setting. The default
setting is 3F8h, IRQ 4.

4.2.13 Serial Port 2

This parameter shows the serial port 2 address and IRQ setting. The default
setting is 2F8h, IRQ 3.

4.2.14 Parallel Port

This parameter shows the parallel port address and IRQ setting. The default
setting is 378h, IRQ 7.
Altos 12000 Series User's Guide