4.4
Disk Drives
Select Disk Drives to input configuration values for disk drive.
The following screen shows the Disk Drives menu:
Floppy Drive A ........................ [1.44-MB, 3.5-inch]
Floppy Drive B ........................ [
LS-120 Drive as ....................... [ Normal ]
• IDE Primary Channel Master
• IDE Primary Channel Slave
• IDE Secondary Channel Master
• IDE Secondary Channel Slave
4.4.1
Floppy Drives
To enter the configuration value for the first floppy drive (drive A), highlight the
Floppy Drive A parameter. Press
appropriate value.
Possible settings for the Floppy Drive parameters are:
•
[
None
•
[360 KB,
•
[1.2 MB,
•
[720 KB,
•
[1.44 MB,
•
[2.88 MB,
Follow the same procedure to configure floppy drive B. Choose None if you do
not have a second floppy drive.
Disk Drives
or
]
5.25-inch]
5.25-inch]
3.5-inch]
3.5-inch]
3.5-inch]
None
]
key to view the options and select the
Index
xcix