Table of Contents
Advertisement
Message
Hard Disk 1 Extended Type
Error
IRQ Setting Error
I/O Parity Error
I/O Resource Conflict(s)
I2C Interface or Device(s)
Error, System Halt
PS/2 Keyboard Error or No
Keyboard Not Connected
PS/2 Keyboard Interface Error
PS/2 Pointing Device Error
PS/2 Pointing Device
Interface Error
Memory Error at:
MMMM:SSSS:OOO
(W:XXXX, R:YYYY)
Where:
M: MB, S: Segment,
O: Offset,
X/Y: write/read pattern
Memory Resource Conflict(s)
Memory Size Mismatch
CPU Clock Mismatch
NVRAM Checksum Error
Onboard Pointing Device IRQ
Conflict(s)
Onboard Pointing Device
Interface Error
Action
Run Setup (see section 4.1).
Run Setup (see section 4.1).
Contact your dealer.
Check ISA add-on card, serial
port, and parallel port.
Shut down and disconnect the
power cable or contact your
dealer.
Check and connect the keyboard
to the system unit.
Replace the keyboard or contact
your dealer.
Check and connect pointing
device.
Run Setup (see section 4.1) and
disable pointing device.
Check DIMMs on the system
board. Contact your dealer.
Check ISA add-on card.
Check the memory size based on
the system specifications. Check
the internal cable connections. If
you are sure that connections
and values are correct, ignore the
message. If the message
reappears, ask for technical
assistance.
Contact your dealer.
Run Setup (see section 4.1) and
disable pointing device.
Replace the pointing device or
contact your dealer.
Index
lxxxvii
Advertisement
Table of Contents
