2.2.6
Large Memory Support Mode
The available settings for this parameter are
Set this parameter to
Advanced
NT 3.1 environment. The setting allows you to support an extended
memory higher than 64 MB. The default setting is
2.2.7
Num Lock After Boot
This parameter allows you to activate the Num Lock function upon
booting. The default setting is
2.2.8
Memory Test
When set to
Enabled
, this parameter allows the system to perform a
RAM test during the POST routine.
system detects only the memory size and bypasses the test routine.
Disabled
The default setting is
2.2.9
Quiet Boot
This parameter enables or disables the quiet boot function. When set
Enabled
to
, BIOS is in graphical mode and displays only an
identification logo during POST and while booting. After which the
screen displays the operating system prompt (such as DOS) or logo
(such as Windows 95). If any error occurred while booting, the system
automatically switches to the text mode.
Even if your setting is
Enabled
while booting by pressing
activation of the keyboard.
When set to
Disabled
, BIOS is in the conventional text mode where
you see the system initialization details on the screen.
BIOS Utility
Normal
if you are working under Windows
Normal
Enabled
.
When set to
.
, you may also switch to the text mode
after you hear a beep that indicates the
and
Advanced
.
.
Disabled
, the
2-11