Acer Altos 12000 Series User Manual page 47

5. Secure the drive with two screws as shown below.
6. Connect the power cable and data cables to the external device.
7. Close the left panel.
To remove a 5.25-inch storage device:
1. Open the front panel door and remove the left panel. See section 2.2 for more
information on opening the housing panels.
2. Disconnect the power and data cables.
3. Detach the external device by removing the screws and gently pulling the
device out.
4. Remove four screws to detach the drive from the drive guide.
Index
xlvii