Ls-120 Drive - Acer Altos 12000 Series User Manual

4.4.2

LS-120 Drive

This parameter allows you not only to enable the LS-120 device installed in your
system, but also to specify the function of the device. The setting affects how
BIOS will detect the device. The default setting is Normal.
Possible settings are:
•
Normal. In this setting, BIOS does not support the LS-120 drive. The drive
needs the LS-120 device driver to operate.
•
Drive A. BIOS recognizes the LS-120 drive as drive A. If a standard diskette
drive A exists, BIOS automatically identifies it as drive B. If a standard
diskette drive B exists, it automatically becomes inaccessible.
If two LS-120 drives exist, BIOS recognizes them as drive A and drive B,
respectively.
•
Drive B. BIOS recognizes the LS-120 drive as drive B. If a standard diskette
drive B exists, it becomes inaccessible.
•
Hard Disk. BIOS recognizes the LS-120 drive as a hard disk. In this setting,
format the LS-120 drive as any other hard disk and assign it a drive letter C,
D, E, and so on. See the documentation that came with the LS-120 drive for
more information.
Altos 12000 Series User's Guide