To remove a 3.5-inch storage device:
1. Open the front panel door and remove the left panel. See section 2.2 for more
information on opening the housing panels.
2. Disconnect the power and data cables.
3. Detach the external device by removing the screw located on the side and
then gently pulling the device out.
4. Remove the four side screws and detach the 3.5-inch from the drive guide.
2.3.2
Installing and Removing a 5.25-inch Storage
Device
The housing comes with a drive guide for installing 5.25-inch internal storage
devices.
To install a 5.25-inch storage device:
1. Open the front panel door and remove the left panel. See section 2.2 for more
information on opening the housing panels.
Altos 12000 Series User's Guide