Memory Test; 4.7.7 Release All Blocked Memory; 4.7.8 Configuration Table; 4.7.9 Boot From Landesk Service Agent - Acer Altos 12000 Series User Manual

4.7.6

Memory Test

When set to Enabled, this parameter allows the system to perform a RAM test
during the POST routine. When set to Disabled, the system detects only the
memory size and bypasses the test routine. The default setting is Disabled
.

4.7.7 Release All Blocked Memory

When set to Enabled, this parameter allows system to bypass testing the defective
memory banks detected earlier. The default setting is Disabled.

4.7.8 Configuration Table

This parameter allows you to enable or disable the appearance of the
configuration table after POST but before booting. The configuration table gives a
summary of the hardware devices and settings that BIOS detected during POST.
The default setting is Enabled.

4.7.9 Boot from LANDesk Service Agent

When set to Enabled, the system boots from a LANDesk Service Agent network
instead of your desktop system. The LANDesk Service Agent is IEEE-standards-
based code that intervenes in the boot process. Please refer to your LANDesk
Manual for more information.
When set to Disabled, the system boots from the drive specified in the Boot
Sequence parameter.
The default setting is Disabled.
Index
cxv