4.5.2
Parallel Port
This parameter allows you to enable or disable the parallel port.
Base Address
This function lets you set a logical base address for the parallel port. The options
are:
•
3BCh
IRQ
This function lets you assign an interrupt for the parallel port. The options are
IRQ 5 and 7.
Altos 12000 Series User's Guide
•
378h
The Base Address and IRQ parameters are
configurable only if the Parallel Port is enabled.
If you install an add-on card that has a parallel
port whose address conflicts with the onboard
parallel port, a warning appears on the screen.
Check the parallel port address of the add-on
card and change the address to one that does
not conflict.
•
278h