Table of Contents
Advertisement
4.12.2
PnP/PCI Options
The PnP/PCI Options allows you to specify the settings for your PCI devices.
Selecting this option displays the following screen:
PCI IRQ Setting
PCI Slot 1 .............. [--]
PCI Slot 2 .............. [--]
PCI Slot 3 .............. [--]
PCI Slot 4 .............. [--]
PCI Slot 5 .............. [--]
PCI Slot 6 .............. [--]
Onboard LAN ............. [--]
Onboard SCSI ............ [--]
AGP ..................... [--]
•
PCI Device Settings
PCI IRQ Setting
Select Auto to let BIOS automatically configure the plug-and-play (PnP) devices
installed on your system. Otherwise, select Manual. The default setting is Auto.
PCI Slots
When you set the PCI IRQ Setting parameter to Auto, these parameters specify
the auto-assigned interrupt for each of the PCI devices. If you set the PCI IRQ
Setting parameter to Manual, you need to specify the interrupt that you want to
assign for each PCI device installed in your system.
PnP/PCI Options
........... [
INTA
Refer to your manual for technical information about the
PCI card.
Auto
]
INTB
INTC
[--]
[--]
[--]
[--]
[--]
[--]
[--]
[--]
[--]
[--]
[--]
[--]
INTD
[--]
[--]
[--]
[--]
[--]
[--]
Index
cxxxv
Advertisement
Table of Contents
