CD-ROM DRIVE DMA MODE
Set this parameter to
Enabled
ROM drive. This improves the system performance since it allows
direct memory access to the CD-ROM. To deactivate the function, set
the parameter to
Disabled
2.3.5
Boot Options
This option allows you to specify your preferred setting for bootup.
The following screen appears if you select Boot Options from the
Basic Configuration menu:
Fast Boot.............................[
Silent Boot...........................[Enabled ]
Num Lock After Boot...................[Enabled ]
Memory Test...........................[Disabled]
Boot Sequence
1
st
[Floppy Disk]
2
nd
[Hard Disk
3
rd
[CD-ROM
First Hard Disk Drive.................[IDE ]
*Configuration Table ..................[Disabled]
¯ = Move Highlight Bar,
Fast Boot
This parameter allows the system to boot faster by skipping some
POST routines. The default setting is
2-18
to enable the DMA mode for the CD-
.
Boot Options
]
]
® ¬ = Change Setting, F1 = Help
Auto
.
Page 1/1
Auto
]
User's Guide