Table of Contents
Advertisement
2.2
Opening the Housing Panels
The system housing has one front door and two side panels. Always observe the
following ESD (electrostatic discharge) precautions before installing any system
component:
1. Do not remove any system component from its packaging unless you are
ready to install it.
2. Wear a wrist grounding strap before handling electronic components. Wrist
grounding straps are available at most electronic component stores.
2.2.1
Removing the Left and Right Panel
A micro-switch is located on the left side of the housing panel. It helps indicate
whether the panel is removed or intact.
Altos 12000 Series User's Guide
Before opening the system housing, refer to
section 1.5 for important precautions and
instructions.
DO NOT attempt the procedures in the
following sections unless you are a qualified
service technician.
Advertisement
Table of Contents
