Table of Contents
Advertisement
Hard Disk 32-Bit Access
Enabling this parameter improves system performance by allowing the
use of the 32-bit hard disk access. This enhanced IDE feature works
only under DOS, Windows 3.x and Novell NetWare. If your software
or hard disk does not support this function, set this parameter to
Disabled
.
2.2.9
Num Lock After Boot
This parameter allows you to activate the Num Lock function upon
booting. The default setting is
2.2.10
Memory Test
When set to
Enabled
, this parameter allows the system to perform a
RAM test during the POST routine.
system detects only the memory size and bypasses the test routine.
The default setting is
Disabled
This item is fixed to
Disabled
enabled the Fast Boot Mode parameter on page 2 of the Basic System
Configuration menu. See section 2.2.12.
2.2.11
Auto Configuration Mode
When enabled, this parameter automatically sets the system
configuration values to their optimized settings. Set this parameter to
the default
Enabled
if you do not know the hard disk drive parameters
and the onboard communication port configurations.
BIOS Utility
Enabled
.
When set to
.
and is not user-configurable if you
Disabled
, the
2-11
Advertisement
Table of Contents
