Cybex TROTTER Elite Treadmill Owner's & Service Manual
About This Manual
An Owner's & Service Manual is shipped with each Cybex TROTTER Elite treadmill. To
purchase additional copies of this manual or any other Cybex manual, please do one of
the following:
• order online at www.eCybex.com
• fax your order to 508-533-5183
• contact Cybex Customer Service at 800-766-3211 then press 63
• or contact Cybex Customer Service at 508-533-4300
To contact Cybex with comments about this manual you may send email to
techpubs@cybexintl.com.
FCC Compliance Information
! WARNING: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception (which can be determined by
turning the equipment off and on) the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio TV technician for help.
Page i
Need help?
Do you have a question about the TROTTER and is the answer not in the manual?
Questions and answers
what is the max weight that a person can weigh on thr totter 545
The maximum user weight for the CYBEX TROTTER Elite Treadmill is 400 lbs. (181 kg). The document does not mention a CYBEX TROTTER 545 specifically.
This answer is automatically generated
I have a Trotter MG 2100 machine and the seat adjustment pin came out and I can’t get it to engage. This would be the seat where you do the shoulder press and lat pull down exercises. I have taken the back Support seat off so I can see the hydraulic cylinder. I don’t see anything through the slot where the pin would go to have it catch anything. Right now the cylinder just goes up and down, but can only be used in the farthest down position as there is no locking mechanism for the cylinder. Thank you for any help you can provide!