Do you have a question about the TROTTER and is the answer not in the manual?
Questions and answers
Kasey Keegan
February 12, 2025
what is the max weight that a person can weigh on thr totter 545
1 comments:
Mr. Anderson
February 12, 2025
The maximum user weight for the CYBEX TROTTER Elite Treadmill is 400 lbs. (181 kg). The document does not mention a CYBEX TROTTER 545 specifically.
This answer is automatically generated
Eldon
March 14, 2025
I have a Trotter MG 2100 machine and the seat adjustment pin came out and I can’t get it to engage. This would be the seat where you do the shoulder press and lat pull down exercises. I have taken the back Support seat off so I can see the hydraulic cylinder. I don’t see anything through the slot where the pin would go to have it catch anything. Right now the cylinder just goes up and down, but can only be used in the farthest down position as there is no locking mechanism for the cylinder.
Thank you for any help you can provide!
1 comments:
Mr. Anderson
May 14, 2025
To fix the seat adjustment mechanism on a CYBEX TROTTER MG 2100 after the adjustment pin came out, follow these steps:
1. Locate the adjustment pin on the side of the seat or seat back. 2. Align the seat or seat back to the correct position where the pin should lock in. 3. Reinsert the pin through the adjustment hole and into the frame to secure the position. 4. Ensure the pin locks firmly in place.
The adjustment mechanism is simple and uses a pull pin system. If the pin is damaged or missing, replace it with a compatible one to restore full function.
Need help?
Do you have a question about the TROTTER and is the answer not in the manual?
Questions and answers
what is the max weight that a person can weigh on thr totter 545
The maximum user weight for the CYBEX TROTTER Elite Treadmill is 400 lbs. (181 kg). The document does not mention a CYBEX TROTTER 545 specifically.
This answer is automatically generated
I have a Trotter MG 2100 machine and the seat adjustment pin came out and I can’t get it to engage. This would be the seat where you do the shoulder press and lat pull down exercises. I have taken the back Support seat off so I can see the hydraulic cylinder. I don’t see anything through the slot where the pin would go to have it catch anything. Right now the cylinder just goes up and down, but can only be used in the farthest down position as there is no locking mechanism for the cylinder. Thank you for any help you can provide!
To fix the seat adjustment mechanism on a CYBEX TROTTER MG 2100 after the adjustment pin came out, follow these steps:
1. Locate the adjustment pin on the side of the seat or seat back.
2. Align the seat or seat back to the correct position where the pin should lock in.
3. Reinsert the pin through the adjustment hole and into the frame to secure the position.
4. Ensure the pin locks firmly in place.
The adjustment mechanism is simple and uses a pull pin system. If the pin is damaged or missing, replace it with a compatible one to restore full function.
This answer is automatically generated