Important Safety Instructions
(Save These Instructions)
! DANGER: To reduce the risk of electric shock, always unplug this treadmill from the
! WARNING: Serious injury could occur if these precautions are not observed. To reduce
User Safety Precautions
• Place your feet on the two top steps when starting or stopping the treadmill.
• Obtain a medical exam before beginning any exercise program.
• Keep children away from the treadmill. Teenagers and disabled persons must be
supervised.
• Obtain instruction before using.
• Stop exercising if you feel faint, dizzy, or experience pain at any time and consult your
physician.
• Read and understand the Owner's Manual and all warnings posted on the unit before using.
• Read and understand emergency stop procedures.
• DO NOT wear loose or dangling clothing while using.
• Keep all body parts, towels, and the like free and clear of moving parts.
• Use the treadmill handrails for support and to maintain balance.
• Stop and place the treadmill at 0 degrees incline (level) after each use.
• DO NOT use the unit if you exceed 400 lbs. (181 kg). This is the rated maximum user weight.
• Replace any warning labels if damaged, worn or illegible.
• Report any malfunctions, damage or repairs to the facility.
Facility Safety Precautions
• Instruct all users on how to clip the e-stop clip onto their clothing and carefully test it prior
to using the treadmill.
• Instruct all users to use caution when mounting and dismounting the treadmill.
• Disconnect all power before servicing the treadmill.
Safety
Page 1-2
Cybex TROTTER Elite Treadmill Owner's & Service Manual
electrical outlet immediately after using it and before cleaning it.
the risk of burns, fires, electric shock, or injury:
Need help?
Do you have a question about the TROTTER and is the answer not in the manual?
Questions and answers
what is the max weight that a person can weigh on thr totter 545
The maximum user weight for the CYBEX TROTTER Elite Treadmill is 400 lbs. (181 kg). The document does not mention a CYBEX TROTTER 545 specifically.
This answer is automatically generated
I have a Trotter MG 2100 machine and the seat adjustment pin came out and I can’t get it to engage. This would be the seat where you do the shoulder press and lat pull down exercises. I have taken the back Support seat off so I can see the hydraulic cylinder. I don’t see anything through the slot where the pin would go to have it catch anything. Right now the cylinder just goes up and down, but can only be used in the farthest down position as there is no locking mechanism for the cylinder. Thank you for any help you can provide!