ASCOM d81 Messenger User Manual page 77

User Manual
Ascom d81 DECT Handset
• The handset software is version 3.0.x or greater.
1 If needed, switch off the handset by pressing
2 Switch on the handset by pressing
3 Select language to be used or press "Cancel". If Cancel is pressed, the default
language (English) will be used.
4 The handset starts to search for IP-DECT systems and will subscribe to the system
when it is found.
Note: If no system is found within 2 minutes or "Cancel" is pressed, the handset's
subscription menu is displayed. Continue with step 5 in chapter
System
Subscribe Other System
If a handset shall subscribe to IP-DECT system (release 3.x.x or older) or to a DECT system, it
must be subscribed manually. If the handset shall subscribe additional system, it must also
be added manually.
To subscribe a system, the "Park:" (Portable Access Right Key) and "Ac:" (Authentication
code) related to the system are needed. Contact the system administrator for more
information.
Note: The PARK code may not be needed if there is no alien DECT system within the
coverage area.
1 Enter the menu by pressing "Menu".
2 Select
3 Select "System".
4 Select "Subscribe".
5 The handset's IPDI is displayed. The IPDI is a unique code that has been assigned to
the handset. Press "Next".
6 Enter System name (optional). If no system name is entered, the default name will be
used. That is System A, System B etc. depending on which system name that is free.
Note: The System name might not be displayed depending on the handset's Display
Management Layout setting. See the handset's Configuration Manual.
7 Press "Next".
8 Enter PARK code (max. 31 digits). The PARK code may not be needed if there is no
alien DECT system within the coverage area.
9 Enter AC code. The AC code length must be between 4 - 8 digits.
10 Press "Next".
11 An information text "Protection on?" is displayed. Select "Yes" if the new system is to
be protected. It is not possible to delete a protected subscription from the System
menu
12 Press "OK". A searching mode starts.
23.It is not possible to unsubscribe a protected system via the System menu. The unsubscribtion must be made via the
Admin menu or the DECT system.
08 June 2012 / Ver. D
for more information.
in the menu.
23
.
.
.
TD 92644EN
Subscribe Other
73