Soft Key - Standard Horizon Matrix GX2000 Owner's Manual

12.12 SOFT KEY

This menu item allows selection of the number of soft keys, soft key selection
and how long the display will show the soft key icon after a soft key is pressed.
1. Press and hold down the [ CALL ( MENU )] key
until "Setup Menu Setup Menu" appears, then select "GEN-
Setup Menu Setup Menu
Setup Menu
ERAL SETUP" with the CHANNEL knob.
ERAL SETUP ERAL SETUP
ERAL SETUP ERAL SETUP
2. Press the [ SELECT ] soft key, then rotate the
CHANNEL knob to "SOFT KEY
3. Press the [ SELECT ] soft key, then rotate the
CHANNEL knob to "NUMBER OF SOFT KEY
4. Press the [ SELECT ] soft key, then rotate the
CHANNEL knob to select the number of soft
keys (3 3 3 3 3 through 10
5. Press the [ SELECT ] soft key, then rotate the CH
knob to "KEY ASSIGNMENT KEY ASSIGNMENT" (to change the
KEY ASSIGNMENT KEY ASSIGNMENT
KEY ASSIGNMENT
use of selected soft keys).
6. Rotate the CHANNEL knob to select the [ Soft ]
key, and press the [ SELECT ] soft key. Then,
rotate the CHANNEL knob to select the new
function to be assigned, and press the [ SE-
LECT ] soft key. Available functions are listed
below.
7. Press the [ QUIT ] key, then rotate the CHAN-
NEL knob to select "KEY TIMER
long the soft key icon will be shown on the
display after a soft key is pressed).
8. Press the [ SELECT ] soft key, then rotate the CHAN-
NEL knob to select the time.
9. Press the [ ENT ] soft key to store the selected setting.
10. Press the [ QUIT ] soft key several times to return to radio operation.
DISPLAY
DIMMER
SCAN
DW
IC
PA/FOG
CMP: COMPASS
WPT
AIS
AIS AL
PRESET
PSET 0 - PSET 9
Page 82
SOFT KEY SOFT KEY
SOFT KEY SOFT KEY".
NUMBER OF SOFT KEY NUMBER OF SOFT KEY NUMBER OF SOFT KEY". NUMBER OF SOFT KEY
10 10
10 10).
KEY TIMER" (selects how
KEY TIMER KEY TIMER KEY TIMER
Select the menu for the display and key back light intensity
Starts and stops Scanning.
Starts and stops Dual Watch Scan.
Activates Intercom between radio and RAM3 mic.
(optional RAM3 required)
Activates the PA / Fog Horn function.
Shows to the "Compass" display.
Shows to the "Waypoint" Navigation display.
Shows to the "AIS" display.
Toggles the AIS alarm "on" and "off".
Porgrams or deletes the preset memory channel.
Immediately recalls the preset memory channel.
GEN- GEN-
GEN- GEN-
FUNCTION
GX2000/GX2100