Table of Contents
Advertisement
3.3.1 Console and Telnet Management
Console Management is done through the RS-232 Console Port. Use the RS-232 cable
supplied in your package to connect directly to a workstation from your switch. Use the
default IP 192.168.16.1 to use Telnet or Web Management to login to the switch and
modify the configuration.
3.3.2 Web-based Management
The switch provides an embedded HTML web site residing in flash memory. It offers
advanced management features and allow users to manage the switch from anywhere
on the network through a standard browser such as Microsoft Internet Explorer.
3.3.3 SNMP Network Management
SNMP (Simple Network Management Protocol) provides a means to monitor and control
network devices, manage configurations, collect statistics, performance and security
information.
3.4
Hardware Description
Front Panel
The front panel of the switch consists of eight auto-sensing 10/100Base-TX RJ45 (Ports
5-8 PoE ports) ports, one mini GBIC slot and one 10/100/1000Base-TX port. The ninth
10/100/1000Base-TX port shares the slot with the mini GBIC. So, if the GBIC is used,
the ninth 10/100/1000Bse-TX port is inactive.
Therefore, the switch provides nine
usable ports. You have the choice of using the ninth port in copper or fiber. The LED
indicators are also located on the front panel of the switch.
The console connection is also on the front panel of the switch. The console port can
be used to perform management functions.
Console connection requires a direct
connection between the switch and a workstation with a RS-232 cable.
Waters Network Systems
MS1008-2G-4POE/PSX1008-2G-4PoE User's Manual
Page 15
Advertisement
Table of Contents
