Table of Contents
Advertisement
5.4
IP Configuration
This menu allows you to change the IP address for the switch as well as reconfigure IP
settings. Once the IP address has been set, the switch must be rebooted. DHCP Client
is disabled by default.
IP Address – Use this option to assign the switch IP address. The default IP address
is 192.168.16.1.
Subnet Mask - Use this option to assign the switch IP subnet mask.
Gateway – Use this option to assign the switch gateway. The default gateway value
is 192.168.16.254.
DNS1 – DNS1 is short for Domain Name Server. DNS is an
domain names
translates
alphabetic, they are easier to remember, however, t
addresses
. Each time a user accesses the
service
must translate the name into the corresponding IP address. For example,
domain name
the
DNS2 - DNS2 is the backup for DNS1. If the DNS1 cannot function, the DNS2 will
replace DNS1.
Waters Network Systems
Figure 5.2 - System Information Screen
into IP addresses. Because
www.net.com might translate to 192.168.1.1.
MS1008-2G-4POE/PSX1008-2G-4PoE User's Manual
domain names
he Internet
domain name of a web page,
Internet
service that
are
is based on
DNS
a
Page 25
IP
Advertisement
Table of Contents
