System Configuration; Network Addressing Configuration; Figure 245: System Configuration Menu; Figure 246: Network Addressing Configuration Menu, Client Address - RuggedCom RuggedRouter RX1000 User Manual

System Configuration

Figure 245: System Configuration Menu

The System name, System location, System contact, and System description fields
configure descriptive parameters for the router.

Network Addressing Configuration

For reference, the set of currently configured and active IP addresses is listed near the
the top of the page.

Figure 246: Network Addressing Configuration Menu, Client Address

The Client address (Source IP) field specifies the address from which snmpd will
send notifications. If the field is blank, the default behaviour will be to transmit the
notification from the IP address of the interface from which the message leaves the
router. Snmpd will return to this behavour if the configured address is not available
when it starts.

Figure 247: Network Addressing Configuration Menu, Addresses to listen on

The table of Addresses to listen on includes the list of currently configured and
active IP addresses, and whether the address is currently listened on. The New field
allows for the addition of other IP addresses.
RuggedCom
Chapter 29 - Maintaining The Router
275