Ntp Configuration; Ntp Server Main Menu; Generic Options; Figure 197: Ntp Server - RuggedCom RuggedRouter RX1000 User Manual
Hide thumbs
Also See for RuggedRouter RX1000:
- User manual (284 pages) ,
- Installation manual (50 pages)
Table of Contents
Advertisement
NTP Configuration
NTP Server Main Menu
Figure 197: NTP Server
Note that the NTP server is disabled by default and may be enabled via the System
folder, Bootup And Shutdown menu. When enabled, any configuration changes may
be made to take effect by selecting the Restart ntpd daemon button. The View GPS
Status and View GPS log sub-menus appear if the router is equipped with a Precision
Time Protocol card.
Generic Options
Figure 198: NTP Generic Options
Set the Broadcast Client option to "Yes" if you wish to act on NTP broadcast
messages.
The default multicast address used for NTP is 224.0.1.1. Select a custom multicast
address with the Custom address field if you wish to use a different addresses.
RuggedCom
Chapter 25 - Configuring NTP
235
- Quick Links:
- Access Methods
- From the Console Port
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the RuggedRouter RX1000 and is the answer not in the manual?
Questions and answers