Ids Configuration; Snort Ids Main Menu; Global Configuration; Interfaces - RuggedCom RuggedRouter RX1000 User Manual

IDS Configuration

Snort IDS Main Menu

This menu configures the Snort IDS and is composed of three sections.
Note that Snort is disabled by default and may be enabled via the System folder,
Bootup And Shutdown menu. If snort is running, configuration changes must be
made active by restarting it. The Restart Snort button will restart snort, listing the
interfaces it is active upon.

Global Configuration

Figure 215: Snort Main Menu part 1

The Global Configuration menu section configures parameters that apply to all

interfaces.

Interfaces

Figure 216: Snort Main Menu part 2

The Interfaces section selects the interfaces Snort will monitor. You must restart
Snort after changing interfaces.
RuggedCom
Chapter 28 - Configuring the Intrusion Detection System
251