Ruggedrouter Functions Supporting Vlans; Pppoe On Native Ethernet Interfaces Fundamentals - RuggedCom RuggedRouter RX1000 User Manual

®
RuggedRouter User Guide

RuggedRouter Functions Supporting VLANs

Static Route and Default
Static Multicast Routing
End To End backup
Traffic Prioritization

PPPoE On Native Ethernet Interfaces Fundamentals

The RuggedRouter supports PPPoE (Point-to-Point Protocol Over Ethernet) over both
external modems (described here) and internal interfaces (described in the chapter
"PPPOE On ADSL"). The PPPOE On ADSL chapter contains more useful
information on PPPOE Authentication, Addresses, DNS Servers and MTU Issues.
Only one PPPoE interface can be created on each Ethernet Interface. Each PPPoE
interface name is assigned internally. The name is "pppX", where X is 10 plus the
native Ethernet interface the PPPoE is created upon (e.g. a PPPoE on eth1 is ppp11).
58
Functions Supported
?
Route
PPPoE
Shorewall Firewall
IPSec
VRRP
Dynamic Routing
GRE Tunnel
DHCP Server
Y
Y
Y
N
Y
N Netkey (policy based VPNs) supports VLAN
Klips (route based VLANs) do not support
VLAN
Y
Y
Both OSPF and RIP support VLAN
Y
Y
Comments
RuggedCom