Editing A Vrrp Group; Viewing Vrrp Instances Status; Figure 156: Vrrp Group; Figure 157: Vrrp Instances Status - RuggedCom RuggedRouter RX1000 User Manual

®
RuggedRouter User Guide

Editing A VRRP Group

Figure 156: VRRP Group

The Group Name field is only for information purpose.
The Group Members field determines the group members in this VRRP group. At
least two members are needed in order to establish a group.

Viewing VRRP Instances Status

Figure 157: VRRP Instances Status

The VRRP Instances Status menu displays the current status of VRRP instances. This
menu does not update status in real time. Click on the Refresh Display button to
update to the current status.
The entries under the Instance column reflect the name of VRRP instances existing as
of the last restart of keepalived.
The entries under the Current State column reflect the state VRRP instances. An
instance can be in one of Master (master for the VRIP), Backup (backup for the VRIP)
or Fault (VRRP interface or Monitored interface) is down.
The entries under the Time Of Change To Current State column reflect when the
current state was entered.
The entries under the VRRP Interface State column reflect the link state of the
interface that the instance runs upon.
The entries under the Monitored Interface State column reflect the link state of the
monitored interface or "none" if an interface is not configured.
182 RuggedCom