Control Panel X; Layout And Button Functions - Kemppi FastMig X 450 Operating Manual

4.

CONTROL PANEL X 37

FastMig X 450 power source features X 37 control panel with a clear and logical LCD menu
display. The menu allows the operator to refine, adapt and manage the arc process and system
function before, during and after welding.
The following information details control panel layout, button functions, operation and set-
up. The menu options and their descriptions are listed for each menu command.
4.1

Layout and button functions

1.
3.
1. Power on button
• Long press (5 sec) switches the panel on or off.
• Short press returns the panel to default initial view (channel information).
This button connects power to the control panel. Use the main switch on the front of the
NOTE!
power source to switch the power source on or off.
2. Welding channel selection buttons
FastMig X 450 offers 100 memory channels for you to store your frequently used welding jobs.
• To browse memory channels, press + and – buttons.
• To store a new welding job to an empty channel, press the soft key under the display
text NEW.
3. MENU button
This button takes you to the main menu list. Proceed following the instructions on screen.
X 37 main menu list
Edit Channel
User Identification
Weld Data
System Config Menu
Language
Select Feeder (WF#)
MMA/CC/CV Mode
© Kemppi Oy / 1312
2. 7.
MENU
CHANNEL
USER
WF#
INFO
F1 F2 F3
6.
Make changes to existing welding channel
Selecti one user out of ten
Check out the values of the last weld
Show device configuration and information
Select your menu language
Select another parallel wire feeder as a setup target
Activate MMA welding, or use CC or CV mode for ArcFeed or MasterTig
LT 250
8. 4.
X 37
5.
EN
11