Introduction; General; About Fastmig X 450 - Kemppi FastMig X 450 Operating Manual

1.

INTRODUCTION

1.1

General

Congratulations on choosing the FastMig X 450 welding equipment. Used correctly, Kemppi
products can significantly increase the productivity of your welding, and provide years of
economical service.
This operating manual contains important information on the use, maintenance and safety of
your Kemppi product. The technical specifications of the equipment can be found at the end
of the manual.
Please read the operating manual and the safety instructions booklet carefully before using
the equipment for the first time. For your own safety and that of your working environment,
pay particular attention to the safety instructions in the manual.
For more information on Kemppi products, contact Kemppi Oy, consult an authorised Kemppi
dealer, or visit the Kemppi web site at www.kemppi.com.
The specifications presented in this manual are subject to change without prior notice.
Important notes
Items in the manual that require particular attention in order to minimise damage and
personal harm are indicated with the
their instructions.
Disclaimer
While every effort has been made to ensure that the information contained in this guide
is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi
reserves the right to change the specification of the product described at any time without
prior notice. Do not copy, record, reproduce or transmit the contents of this guide without
prior written permission from Kemppi.
1.2

About FastMig X 450

FastMig X 450 is a multi-purpose welding power source designed for demanding professional
use. It is suitable for synergic pulsed MIG/MAG, synergic 1-MIG and basic MIG/MAG welding,
as well as the modified WiseRoot+™ process. It can also be used as a welding power source for
MMA welding, and TIG welding is also available, when connected to MasterTig LT 250.
Control panel X 37 is included in the delivery for selecting, setting and managing the welding
system prior to and during system use.
FastMig X 450 offers a multi-process solution for a wide range of welding applications. Various
cable options, welding software options, remote control units and other accessories are
available for this product. Please see the list at the end of this manual.
© Kemppi Oy / 1312
notation. Read these sections carefully and follow
'NOTE!'
EN
3