C5 Error Handling - Dalsa P-2 Series User Manual

67

C5 Error Handling

Use the
come in the following order:
•
•
•
•
Example: value returned following a ccf command
gps
2 0 192 33
The returned value, 2 0 192 33, reads as follows:
Returned value
2
0
192
33
The following tables list the codes for errors, informal messages, and monitoring task
messages. (Refer to section E7 for a list of all available commands.)
Error Codes
Cod
e
0
1
2
3
4
5
6
7
8
03-32-00493-11
command to read the status of the last command executed. Return values
gps
Decimal number representing the code of the last command.
Decimal number representing the error code for last command executed.
Decimal value representing sum of all informal message codes caused by last
command executed.
Decimal number representing sum of all pending warning values from all monitoring
tasks.
Description
Command code: correction_calibrate_fpn
Error code: successful
Informal message: code 64 + code 128
Monitoring task message: code 1 + code 32
Description
Command executed successfully
Internal camera error (PIXEL
INDEX)
Internal camera error (RESULT
CODE)
Invalid command
Command parameters incorrect
or out of range
Command not available in
current exposure mode
Command available in
CALIBRATED mode only
Command available in
UNCALIBRATED mode only
Command not available in
VIDEO TEST mode
Suggested Cause
Command executed without major error
detected
Internal software error trap
Internal software error trap
Command not recognized
Command parameters are invalid or out of
range
ssf and set are allowed only in mode 2
(ssf and set) and in mode 6 (set)
ccf, ccp
cao, cag
sao, sg
Piranha2 User's Manual
DALSA