Error Handling And Command List; Error Handling - Dalsa Piranha HS Series User Manual

Piranha HS-xx RoHS User Manual
Error Handling and
Command List

Error Handling

The follow ing table lists w arning and error m essages and provid es a d escription and
possible cau se. Warning m essages are retu rned w hen the cam era cannot m eet the fu ll
valu e of the requ est; error m essages are retu rned w hen the cam era is u nable to com plete
the requ est.
Table 22: Warning and Error Messages
Warning Messages
Camera Response
OK>
Warning 01: Outsid e of specification>
Warning 02: Clipped to min>
Warning 03: Clipped to max>
Warning 04: Related parameters
ad justed >
Warning 07: Coefficient may be
inaccurate A/ D clipping has occurred >
Warning 08: Greater than 1% of
coefficients have been clipped
Warning 09: Internal line rate
inconsistent w ith read out time>
Teledyne DALSA
All manuals and user guides at all-guides.com
Appendix A
Comment
Camera executed command
Parameter accepted w as outsid e of specified
operating range (e.g. gain greater than ±10 d B of
factory setting, or SSF below specification).
Parameter w as clipped to the current operating
range. Use GCP or GET to see value used .
Parameter w as clipped to the current operating
range. Use GCP or GET to see value used .
Internal operating cond ition is ad justed to
accommod ate the entered command . E.g.
requesting exposure time longer than line time
automatically ad justs the line time to meet the
exposure time requirement.
In the region of interest (ROI) greater than 6.251%
single or 1% of averaged pixel values w ere zero or
saturated .
Greater than 1% of FPN or PRNU coefficients have
been calculated to be greater than the maximum
allow able and so w ere clipped .
Changing this param eter (e.g. vertical binning) has
changed read out time and that is greater than the
internal SYNC
85
03-032-20013-03