Error Handling And Command List; B1 All Available Commands - Dalsa 4M30 User Manual

74
Error Handling and
Command List

B1 All Available Commands

As a quick reference, the following table lists all of the commands available to the camera
user. For detailed information on using these commands, refer to Chapter 3.
All Available Commands
Command
correction calibrate
Parameters:
FPN
t = tap id
i = integer value
camera link mode
f = real number
s = string
m = member of a
set
calculate PRNU
algorithm
03-032-20044-01
Syntax Parameters
ccf
clm m
cpa i i
Falcon 4M Camera Manual
Appendix B
Description
Performs FPN calibration and
eliminates FPN noise by subtracting
away individual pixel dark current.
Output mode to use:
2 : Base configuration, 2 taps, 8 bit
output
3 : Base configuration, 2 taps, 10 bit
output
15 : Medium configuration, 4 taps, 8 bit
output (4M60 only)
16 : Medium configuration, 4 taps, 10
bit output (4M60 only)
Performs PRNU calibration according
to the selected algorithm.
The first parameter is the algorithm
where i is:
2 = Calculates the PRNU coefficients
using the entered target value
Target
PRNU Coefficient =
i
(AVG Pixel Value ) ‐ (FPN +
This algorithm is useful for achieving
uniform output across multiple
cameras.
value)
sdo
i
i
DALSA