Daily Inspection - TOHATSU EverRun MX 40D3 Owner's Manual

Table of Contents

Advertisement

50
INSPECTION AND MAINTENANCE
ENOM01607-0

1. Daily Inspection

Perform the following checks before and
after use.
Item
Fuel System
Lubrication
System
Electrical
Equipment
Throttle System
Recoil Starter
10
Clutch and
Propeller System
Installation of
Motor
Cooling Water
Tools and Spares
Other Parts
*1 Have this handled by your dealer.
Points to Check
• Check the amount of fuel in the tank.
• Check for dust or water in the fuel filter.
• Check rubber pipes for fuel leakage.
• Check the amount of engine oil in the oil tank.
• Check for dust or water in the oil filters.
• Check the spark plugs for dirt, wear and carbon built-up.
Spark plugs : NGK B-8HS-10/NGK BR-8HS-10
• Check if the main switch functions normally.
• Check if the battery electrolyte level and specific gravity are
nomal.
• Check for loose connections on battery terminal.
• Check that the stop switch functions normally and make sure
the lock plate is secured.
• Check cords for loose connections and damage.
• Check if the carburetor and magneto are working normally by
turning the throttle grip, and check for any looseness between
the links.
• Check ropes for wear and damage.
• Check the ratchet for engagement.
• Check the propeler for bent or damaged blades.
• Check the propeller nut is tightened and the split pin is in correct
position
• Check all the motor installation bolts with the boat.
• Check the thrust rod installation.
• After starting the outboard motor, make sure that water is
being discharged from the cooling water check port.
• To be ready tools and spare parts for replacing spark plugs,
propeller, etc.
• Check if the spare rope is provided.
• Check if the anode and trim tab are securely installed.
• Check the anode and trim tab for corrosion and deformation.
ENOW00078-0
WARNING
Do not use outboard motor if any abnormal-
ity is found during pre-operation check or it
could result in severe damage to the motor
or severe personal injury.
Action
Replenish
Clean
Replace *1
Replenish
Clean
Clean or replace
Remedy or replace *1
Replenish or recharge
Retighten
Remedy or replace *1
Correct or replace *1
Replace *1
Correct *1
Replace *1
Correct or replace *1
Replace
Tighten
Tighten
Repair if necessary
Replace

Advertisement

Table of Contents
loading

This manual is also suitable for:

Everrun mx 50d3

Table of Contents