Operation; Selecting The Command Mode - NEC Flash Memory Programmer PG-FP3 User Manual

6.2 OPERATION

The PG-FP3 can execute the E.P .V., ERASE, PROGRAM, VERIFY, and PROM Load commands in the stand-alone
mode. For processing and using the commands, see Chapter 5.
In standalone mode, it is not necessary to connect to a host. However, a parameter file must be loaded from the
host and TYPE setting must be performed by the host in advance.

Selecting the command mode

When power is turned on, E.P .V. mode is set. The mode changes as follows each time the MODE key is
pressed:
E.P .V. ERASE
Executing a command
To execute the currently selected command, press the ENTER key. While the command is being executed, an
LED indicating the mode blinks.
68
CHAPTER 6 STAND-ALONE FUNCTION
PROGRAM VERIFY
Photo 6-1. Selecting the Command Mode
E.P .V. command mode
ERASE command mode
PROGRAM command mode
User's Manual U13502EJ2V0UM00
LOAD E.P .V.
VERIFY command mode
PROM LOAD command mode