NEC Flash Memory Programmer PG-FP3 User Manual page 60

The verification is made in either of the following two methods. The PG-FP3 automatically executes the
verification in the method that matches the target device.
<1> Re-sends the written data from the PG-FP3 and verifies the data written in the flash memory against the
re-sent data.
NP13 Verifying 010 %
NP13 Verifying 020 %
NP13 Verifying 030 %
NP13 Verifying 040 %
NP13 Verifying 050 %
NP13 Verifying 060 %
NP13 Verifying 070 %
NP13 Verifying 080 %
NP13 Verifying 090 %
NP13 Verifying 100 %
NP14 Verify..OK
<2> Reads the data programmed in the flash memory, changing the read level, and verifies the data.
NP13 Verifying 01s
NP13 Verifying 02s
NP13 Verifying 03s
:
NP14 Verify..OK
If the result of verification is OK, the program has been written correctly.
60
CHAPTER 5 COMMAND REFERENCE
User's Manual U13502EJ2V0UM00