Maintenance Mode - Star Trac SPINNER BLADE ION Installation & Owner's Manual

Maintenance Mode

In Maintenance mode, a number of computer settings can be changed from their default setting as well as providing a summary of the
computers usage. Entrance into Maintenance Mode requires a magnet be waved next to the upper right side of the computer as shown.
A magnet is supplied with the bikes computer and if that magnet is unavailable, then most any magnet will work.
Within Maintenance mode, there are a total of 8 screens. Navigation from one screen to the next is done by pressing and release the
MODE button. These screens and the functions available in these screens are as follows:
Screen 1
Screen 2
Screen 3
38 | SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER'S MANUAL
Screen 1 displays the current software
version loaded into the computer and is for
information only.
Screen 2 is the Distance units' screen.
The default setting for distance is MILES.
To change to KILOMETERS, press and release
the RESET button. The units will change from
miles to kilometers.
Pressing and releasing the RESET button will
toggle between miles and kilometers
Screen 3 is the backlight On (bLon) screen.
In this screen, the time that the backlight is
illuminated can be changed.
The default setting for bLon is 30 seconds. The
time can be changed between 30, 60, 90 and
120 seconds.
To change the time, press and release the
RESET button. The time will change between
30, 60, 90 and 120 seconds.