Star Trac SPINNER BLADE ION Installation & Owner's Manual page 22

27.
Slide the handlebar onto the height adjustment post
(Fig. 27)
.
28.
Reinstall the stop bolt into the handlebar slider
(Fig. 28) using a 4mm hex key.
29.
Locate the ION console, plastic cable "Pull Prevent"
clip, and corresponding hardware (Fig. 29).
Hardware:
• M5x0.8x25mm Button Head Bolt
• M5x0.8x12mm Button Head Bolt
• Plastic Oval Cap
• Metal Oval Mount Plate
30.
Mount the rear oval shaped plastic cover and metal
plate over the wire harness protruding from the
handlebar post (Fig. 30). Insert the plastic cover first
followed by the metal plate.
22 | SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER'S MANUAL
Fig. 27
Fig. 28
Fig. 29
Fig. 30