Table of Contents
Advertisement
Orientation
Control Buttons
®
The Spinner
Blade ION Computer has three buttons as shown from which to navigate through the four display screens. These
buttons are:
1.
BACKLIGHT
2.
MODE
3.
RESET
.
Generator
A unique feature to the Spinner Blade ION is an on-board generator which powers the computer, eliminating the need to replace
batteries as part of the bi-annual maintenance routine.
When the bike is not in use the computer is powered off. As the rider begins to pedal, blue LED lights illuminate providing positive
feedback that the generator is powering the computer.
The computer does contain an internal lithium ion battery to provide summary information once the ride is over and the flywheel is
no longer in motion or when the computer is in maintenance mode. This rechargeable battery is designed for a 3+ year life on the
product. If a battery replacement is required, they are off the shelf and available through on-line battery stores or through
startrac.com. In a club facility, the bikes frequent use will regularly recharge the internal battery. Regular use of the Spinner Blade
ION is ideal to maintain a charge to the internal battery and maximize its life.
34
| SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER'S MANUAL
BACKLIGHT
The backlight button is used to illuminate the display screen for
the default time of 30 seconds. The length of time can be
configured for: 30, 60, 90 or 120 seconds in the maintenance
mode. To illuminate the display constantly, hold down the
backlight button for 2 seconds. To turn the backlight off, press
the backlight button again.
MODE
The mode button is used to change from the main display
screen to the secondary display screens. Each of the
secondary display screens various types of ride data.
RESET
The reset button is used to mark and measure timed stages
(intervals) and to stop timed stages on the ION computer.
Hide quick links:
Advertisement
Table of Contents
