Star Trac SPINNER BLADE ION Installation & Owner's Manual page 18

13.
Locate the front foot strut along with the corresponding
hardware that secures it to the bike frame (Fig. 13).
Hardware:
• M8x1.25x30mm Hex Head Bolt
• 8mm Split Lock Washer
• 8mm Plain Washer
•
Threaded Foot Plate
14.
Insert the threaded plate (Fig. 14) into the bottom
section of the front foot bracket.
15.
Install the front foot strut (Fig. 15) and tighten hardware
using the supplied multi sized open wrench.
16.
Return the bike to the upright position (Fig.16).
18 | SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER'S MANUAL
Fig. 13
Fig. 14
Fig. 15
Fig. 16