Frame Care; Parts Replacement - Star Trac SPINNER BLADE ION Installation & Owner's Manual

Frame Care

It is recommended that the frame on the each bike is sealed from sweat impurities that may speed the
corrosion process at least once a month.
Cleaning
Using a clean terry cloth that is dampened in 30 parts water to 1 part non-abrasive detergent or car wash
soap rub over the frame of the product.
Wash/Dry
Dampen a clean terry cloth in an only water solution to wipe away any soap residue. Using a second
clean and dry terry cloth; dry off any liquid residue.
Sealing
The frame can be sealed by applying a wax or polishing coat that can help repel away liquids like human
perspiration. Apply the wax or polish per the manufacturer's instructions for best results.
Parts Repalcement
Depending on the use and maintenance of the product; certain items can be replaced on a scheduled timeframe. The
list (Fig. 2) below shows the components that can be replaced on a scheduled date to maximize the end user
experience.
Brake Pad Assembly
ION Computer Internal Recharging
NOTE: Battery life is dependent on the use of the product and the trickle charge that is created by the generator
flywheel when in use. A bike that is not in use for extended periods of time will not charge batteries and shorten the
lifespan of such component.
Component
Chain
Battery
SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER'S MANUAL |
Time Frame
12 Months
24 Months
36-48 Months
OR
As Needed Based on Lack of Use
Fig. 2
45