Pairing Ant+ Devices - Star Trac SPINNER BLADE ION Installation & Owner's Manual

Pairing ANT+ Devices

®
The Spinner Blade ION computer is equipped with an Ant+ chip
that allows it to broadcast ride data-such as power and cadence to
an Ant+ compatible device.
To pair a device to the ION computer, the heart rate icon must be
flashing in the upper left hand corner of the screen.
When the ION computer is first powered up, the heart rate icon will
flash for 30 seconds and then shut off. If a device was not
successfully paired with the computer in the first 30 seconds,
press and hold the MODE button for two seconds to make the
flashing heart rate icon reappear.
NOTE: The users' device must be Ant+ compatible and capable of
receiving the data files broadcast by the Ant+ chip. Users should
consult with the documentation for their device, or check the Ant+
website at www.thisisant.com .for compatibility.
Some compatible devices such as a sport watch or heart rate
strap, may necessitate the user hovering themselves near the
device and be over the Ant+ graphic on the computer face while
the heart rate icon is flashing. The personal device settings must
be set to pair with the ION computer. Follow the instructions for the
compatible device when pairing with the ION computer.
SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER'S MANUAL | 41